Transfer Unit 90°, 50

R5T0050

Application

90 degree transfer of products in various sizes:

  • Weight max. 50 kg: min. 300 x 400 to max. 800 x 800 mm
  • Weight max. 20 kg: min. 300 x 400 to max. 400 x 1200 mm

The Transfer Unit 90° can be integrated into any zone of a Powered Roller Conveyor Straight.

Request
Product features
share-icon share-icon share-icon share-icon share-icon

Eckumsetzer | Transfer Unit 90°

Eckumsetzer | Transfer Unit 90°

Eckumsetzer | Transfer Unit 90°
Description
Information
Technical data
Measurement
Downloads
Extrusion deflection
Video

Product Information

Space-saving design, flexible application options

  • The safe and compact Transfer Unit with an angle of 90° in both directions has a particularly space-saving design and can be retrofitted in existing straight lines. As with all Robotunits Powered Roller Conveyor elements, the control electronics are fully pre-installed and compatible in the complete kit.

Facts

  • transfer angle: 90 at both sides
  • compact, closed system
  • fully integrated control electronics

Benefits

  • repositionable and expandable at any time
  • plant operation possible in confined spaces
  • use of the same control electronics in the complete system

Drive
  • brushless 24V DC motor for stroke and belt
  • temperature range: from +2°C to +40°C
  • max. continuous current per motorized roller: 3.5A
  • roller material: Galvanized steel
  • timing belt material: PU
  • duration of the stroke: 0.5 s
  • Max. speed:
    ≤ 20 kg: 48 m/min
    ≤ 40 kg: 33 m/min
    ≤ 50 kg: 26 m/min
  • Max. weight of conveyed material: 50 kg

Control Unit

completely pre-installed incl. sensors

Configuration

zero pressure accumulation control logic with downstream powered roller conveyor (not with EtherCAT)

Load types

Force impact

Distributed Distributed
Central Central

Load case

Supported on both sides, distributed Supported on both sides
Clamped on both sides, distributed Clamped on both sides
Clamped on one side, distributed Clamped on one side

Calculation values

Force   F

N

Distance   L

mm

Calculation result

Deflection  f 0.00 mm
Bending stress  σ 0.00 N/mm²
Bending stress must not be greater than 50 N/mm²!
The deflection should not exceed 3 mm.
The calculations do not contain any certainty!

Summary

Profile: Transfer Unit 90°, 50 Force impact: Distributed Extrusion alignment: Horizontal Load case: Supported on both sides Force  F : 0 N Distance  L : 0 mm

Video