Stand for C8S
C8U
Application
Stand for Slat Top Conveyor 80
Product Information
Material |
|
|---|---|
Scope of delivery |
Stand segment fully assembled and attached to the conveyor belt |
Standard Conveyor Stand S |
Leveling Bases BAS4008 (Height adjustment ± 20 mm) |
Standard Conveyor Stand R |
Swivel Castors with brake CAS3080 |
Load types
Force impact
Distributed
Central
Load case
Supported on both sides
Supported on both sides
Supported on both sides, off-center
Clamped on both sides
Clamped on both sides
Clamped on both sides, off-center
Clamped on one side
Clamped on one side
Calculation values
Force F
NDistance L
mmDistance L1
Distance L2
Calculation result
| Deflection f | 0.00 | mm |
| Bending stress σ | 0.00 | N/mm² |
| Profile | Deflection f (mm) | Bending stress σ (N/mm²) |
|---|
Bending stress must not be greater than 50 N/mm²!
The deflection should not exceed 3 mm.
The calculations do not contain any certainty!
Summary
Profile: Stand for C8S Force impact: Distributed Extrusion alignment: Horizontal Load case: Supported on both sides Force F : 0 N Distance L : 0 mm Distance L1 : 0 mm Distance L2 : 0 mm
