Extrusion 50x50
PIL 5050
Application
preferably in mechanical engineering, e.g.
- machine frames
- robot frame structures
- workstations
- machine guardings
- enclosures
- shelves, racks, trolleys (MRO equipment)
Article
Article
Extrusion 50x50, cut to length, M10 tapped on both ends, 50mm deep
Add to cart
Extrusion 50x50, cut to length, M10 tapped on both ends, 50mm deep
PIL5050SNN
Not available
Extrusion 50x50, stock length 6050mm
Add to cart
Extrusion 50x50, stock length 6050mm
PIL5050NNN
Not available
Extrusion 50x50, 64 units, stock length 6050mm
Add to cart
Extrusion 50x50, 64 units, stock length 6050mm
PIL5050PAC
Not available
Extrusion 50x50, cut to length, M10 tapped on both ends, 50mm deep
PIL5050SNN
Unit price:
Total:
Product Information
Material |
EN AW-6063-T66 clear anodized aluminum |
|---|---|
Section modulus |
Wx= Wy: 8.0cm3 |
Geometrical moment of inertia against x + y |
Ix= Iy: 20.0cm4 |
Geometrical moment of inertia against torsion |
It: 4.8cm4 |
Cross sectional area |
A: 857.5mm2 |
Weight/Meter |
2.350 kg |
Load types
Force impact
Distributed
Central
Load case
Supported on both sides
Supported on both sides
Supported on both sides, off-center
Clamped on both sides
Clamped on both sides
Clamped on both sides, off-center
Clamped on one side
Clamped on one side
Calculation values
Force F
NDistance L
mmDistance L1
Distance L2
Calculation result
| Deflection f | 0.00 | mm |
| Bending stress σ | 0.00 | N/mm² |
| Profile | Deflection f (mm) | Bending stress σ (N/mm²) |
|---|
Bending stress must not be greater than 50 N/mm²!
The deflection should not exceed 3 mm.
The calculations do not contain any certainty!
Summary
Profile: 50x50 Force impact: Distributed Extrusion alignment: Horizontal Load case: Supported on both sides Force F : 0 N Distance L : 0 mm Distance L1 : 0 mm Distance L2 : 0 mm
CAD data
You don`t already have a user account? Register now for free or login here to download the CAD data.
