Extrusion 50x50

PIL 5050

Application

preferably in mechanical engineering, e.g.

  • machine frames
  • robot frame structures
  • workstations
  • machine guardings
  • enclosures
  • shelves, racks, trolleys (MRO equipment)
Article
Article
Extrusion 50x50, cut to length, M10 tapped on both ends, 50mm deep
Add to cart

Extrusion 50x50, cut to length, M10 tapped on both ends, 50mm deep

PIL5050SNN

Not available
Extrusion 50x50, stock length 6050mm
Add to cart

Extrusion 50x50, stock length 6050mm

PIL5050NNN

Not available
Extrusion 50x50, 64 units, stock length 6050mm
Add to cart

Extrusion 50x50, 64 units, stock length 6050mm

PIL5050PAC

Not available
Extrusion 50x50, cut to length, M10 tapped on both ends, 50mm deep
PIL5050SNN
Unit price:
Total:
Extrusion 50x50, stock length 6050mm
PIL5050NNN
Total:
Extrusion 50x50, 64 units, stock length 6050mm
PIL5050PAC
Total:

Product Information

Material

EN AW-6063-T66 clear anodized aluminum

Section modulus

Wx= Wy: 8.0cm3

Geometrical moment of inertia against x + y

Ix= Iy: 20.0cm4

Geometrical moment of inertia against torsion

It: 4.8cm4

Cross sectional area

A: 857.5mm2

Weight/Meter

2.350 kg

Load types


Force impact

Distributed Distributed
Central Central

Load case

Supported on both sides, distributed Supported on both sides
Clamped on both sides, distributed Clamped on both sides
Clamped on one side, distributed Clamped on one side

Calculation values


Force   F

N

Distance   L

mm

Calculation result


Deflection  f 0.00 mm
Bending stress  σ 0.00 N/mm²
Bending stress must not be greater than 50 N/mm²!
The deflection should not exceed 3 mm.
The calculations do not contain any certainty!

Summary


Profile: 50x50 Force impact: Distributed Extrusion alignment: Horizontal Load case: Supported on both sides Force  F : 0 N Distance  L : 0 mm

CAD data

To the CAD data