Extrusion 40x120
PIL 4012
Application
universally applicable, e.g. for
- roller conveyor
- cable ducts
- manual workstations
- in- and outfeed conveyors
Article
Article
Extrusion 40x120, cut to length, tapped on both ends M6x15, M8x50
Add to cart
Extrusion 40x120, cut to length, tapped on both ends M6x15, M8x50
PIL4012SNN
Not available
Extrusion 40x120, stock length 6050mm
Add to cart
Extrusion 40x120, stock length 6050mm
PIL4012NNN
Not available
Extrusion 40x120, 24 units, stock length 6050mm
Add to cart
Extrusion 40x120, 24 units, stock length 6050mm
PIL4012PAC
Not available
Extrusion 40x120, cut to length, tapped on both ends M6x15, M8x50
PIL4012SNN
Unit price:
Total:
Product Information
Material |
clear anodized aluminum |
|---|---|
Section modulus |
Wx: 27.6cm3 |
Section modulus |
Wy: 6.8cm3 |
Geometrical moment of inertia against x |
Ix: 182.2cm4 |
Geometrical moment of inertia against y |
Iy: 19.3cm4 |
Geometrical moment of inertia against torsion |
It: 1.2cm4 |
Cross sectional area |
A: 1108.8mm2 |
Weight/Meter |
3.050 kg |
Load types
Force impact
Distributed
Central
Extrusion alignment
Horizontal
Vertical
Load case
Supported on both sides
Supported on both sides
Supported on both sides, off-center
Clamped on both sides
Clamped on both sides
Clamped on both sides, off-center
Clamped on one side
Clamped on one side
Calculation values
Force F
NDistance L
mmDistance L1
Distance L2
Calculation result
| Deflection f | 0.00 | mm |
| Bending stress σ | 0.00 | N/mm² |
| Profile | Deflection f (mm) | Bending stress σ (N/mm²) |
|---|
Bending stress must not be greater than 50 N/mm²!
The deflection should not exceed 3 mm.
The calculations do not contain any certainty!
Summary
Profile: 40x120 Force impact: Distributed Extrusion alignment: Horizontal Load case: Supported on both sides Force F : 0 N Distance L : 0 mm Distance L1 : 0 mm Distance L2 : 0 mm
CAD data
You don`t already have a user account? Register now for free or login here to download the CAD data.
