Extrusion 16x40
PIL 1640
Application
universally applicable, e.g. for
- signs, shelves, racks
- hand rails, guide rails
- MRO equipment
Article
Article
Extrusion 16x40, cut to length, M6 tapped on both ends, 15mm deep
Add to cart
Extrusion 16x40, cut to length, M6 tapped on both ends, 15mm deep
PIL1640SNN
Not available
Extrusion 16x40, stock length 6050mm
Add to cart
Extrusion 16x40, stock length 6050mm
PIL1640NNN
Not available
Extrusion 16x40, cut to length, M6 tapped on both ends, 15mm deep
PIL1640SNN
Unit price:
Total:
Product Information
Material |
EN AW-6063-T66 clear anodized aluminum |
|---|---|
Section modulus |
Wx: 2.9cm3 |
Section modulus |
Wy: 1.0cm3 |
Geometrical moments of inertia against x |
Ix: 5.8cm4 |
Geometrical moments of inertia against y |
Iy: 0.8cm4 |
Geometrical moments of inertia against torsion |
It: 0.6cm4 |
Cross sectional area |
A: 323.6mm2 |
Weight/Meter |
0.890 kg |
Load types
Force impact
Distributed
Central
Extrusion alignment
Horizontal
Vertical
Load case
Supported on both sides
Supported on both sides
Supported on both sides, off-center
Clamped on both sides
Clamped on both sides
Clamped on both sides, off-center
Clamped on one side
Clamped on one side
Calculation values
Force F
NDistance L
mmDistance L1
Distance L2
Calculation result
| Deflection f | 0.00 | mm |
| Bending stress σ | 0.00 | N/mm² |
| Profile | Deflection f (mm) | Bending stress σ (N/mm²) |
|---|
Bending stress must not be greater than 50 N/mm²!
The deflection should not exceed 3 mm.
The calculations do not contain any certainty!
Summary
Profile: 16x40 Force impact: Distributed Extrusion alignment: Horizontal Load case: Supported on both sides Force F : 0 N Distance L : 0 mm Distance L1 : 0 mm Distance L2 : 0 mm
CAD data
You don`t already have a user account? Register now for free or login here to download the CAD data.
