Allround Panel Special Width

The all-rounder with maximum safety for your machine

With this safety fence system, the panels are simply hooked into the pre-assembled fence posts and can be quickly removed and re-installed if required. The enclosures provide large-area access and are therefore particularly suitable for machine replacement or inspection work in industrial applications. Our safety fence system can be individually configured.

Configure
Product features
share-icon
Description
Information
Technical data
Measurement
Downloads
Weld Mesh Cut Calculator
CAD data

Product Information

Scope of delivery

  • 4 extrusions 40x40 PIL 4140
  • 4 fasteners FAS 4043, conductive
  • 2 bolts SSP 4900

Panel option

  • weld mesh or 4mm thick polycarbonate

Note panel filling

  • any special widths from 152mm to 1506 are available for a 4mm thick Polycarbonate panel option

Material
  • anodized aluminum
  • galvanized steel

Panel option

weld mesh or polycarbonate

ESD

weld mesh and frame conductive

Load types

Force impact

Distributed Distributed
Central Central

Load case

Supported on both sides, distributed Supported on both sides
Clamped on both sides, distributed Clamped on both sides
Clamped on one side, distributed Clamped on one side

Calculation values

Force   F

N

Distance   L

mm

Calculation result

Deflection  f 0.00 mm
Bending stress  σ 0.00 N/mm²
Bending stress must not be greater than 50 N/mm²!
The deflection should not exceed 3 mm.
The calculations do not contain any certainty!

Summary

Profile: Allround Panel Special Width Force impact: Distributed Extrusion alignment: Horizontal Load case: Supported on both sides Force  F : 0 N Distance  L : 0 mm

Dimensions

Calculation values

Panel height   H

mm
Select:

Panel width   B

mm
Select:

Calculation result

Enter panel width and height to check feasibility within the mesh grid – the decisive factor is the correct mesh grid protrusion to the aluminium profile.

Summary

Panel height H: – Panel width B: – Weld Mesh height: – Weld Mesh width: – Inside height: – Inside width: – Mesh grid protrusion A: – Mesh grid protrusion B: –

CAD data

To the CAD data